







IM-200BAB Crescent Cuber Icemaker, Air-cooled, Built in Storage Bin
39″ W X 23″ D X 33″ H
Parts and Service
Electrical Specs
Single phase, 115v/60/1 5′ 7/8″ ft cord with NEMA 5-15 Plug, Amperage: 7.6, Max Fuse/HACR Breaker: 15 A
Operating Limits
Ambient Temp Range: 45 – 100°F, Water Temp Range: 45 – 90°F, Water Pressure: 10 – 113psig, Voltage Range: 104 – 127V, Heat Rejection: 3420 BTU/hr, Refrigerant Charge: R-404A, (10.6 oz. / 300 g)
Plumbing Specs
1/2″ FPT Inlet, Minimum 1/4″ Nominal ID Copper Water Tubing or Equivalent, 3/4″ FPT Outlet, Minimum 3/4″ Nominal ID Hard Pipe or Equivalent
Shipping Weight
203
Utility Consumption
8.2 kWh per 100 lbs @ 90/70, 24.5 gal of Potable Water per 100 lbs @ 90/70
Warranty
Five Years: Parts warranty on Compressor, air-cooled condenser coil. Three Years: Parts & Labor warranty on entire machine.
Overview and Features
The IM-200BAB is capable of producing approximately 186 lbs of individual square cubes. The square cube shape melts very slowly, chilling beverages with very minimal dilution. This Air-cooled, Self Contained, Built in Storage Bin icemaker features Up to 75 lbs of built-in storage capacity (2.5ft3)*. The IM-200BAB is a Single phase, 115v/60/1, 5′ 7/8″ ft cord with NEMA 5-15 plug and uses R-404A refrigerant (10.6 oz. / 300 g). Min Clearance: 0″ on top, 2″ on left side, 6″ on right side, 2″ rear. Please consult the Specification Sheet for additional details.*Rated in accordance with AHRI Standard 820(I-P). Capacity based on 100% of total volume x 30 lb/ft3 average density of ice. IM-200BAC.
- Discontinued – Replaced by IM-200BAC
- Dimensions: 39-1/2″ W x 23-5/8″ D x 33- 1/2 ” H
- Up to 186 lbs of ice produced per 24 hours
- Up to 75 lbs of built-in storage capacity (2.5ft3)
- Produces individual square cubes
- Durable stainless steel exterior
- Front in, front out airflow
- EverCheck™ alert system
- Easily disassembled water circuit for easy cleaning
- Min Clearance: 0″ on top, 2″ on left side, 6″ on right side, 2″ rear
- R-404A refrigerant (10.6 oz. / 300 g)
- Heat Rejection:3420 BTU/hr
- Ambient temperature range: 45 – 100°F
- Water temperature range: 45 – 90°F
- Water pressure: 10 – 113psig
- Voltage range: 104 – 127V
- 7.6 amps (15 Amp Max fuse)
- 8.2 kwh/100 lbs.@ 90/70
- Single phase, 115v/60/1, 5′ 7/8″ ft cord with NEMA 5-15 plug
- Clean ice and easy maintenance lead to longer unit life span
- Three Years: Parts & Labor warranty on entire machine.
- Five Years: Parts & Labor warranty on evaporator.